Jump To...

Laerdal CSU4

Part #FA887A140

The Laerdal CSU4 mount uses our Generic-X interface for Ferno-Track. Quarter-turn capture and release allows the CSU4 to be rapidly installed or removed from the mount as needed. Originally designed for use in fixed wing aircraft, this mount compensates for the curvature of the fuselage. Standard vertical variants are available.

# FA887A140

Sorry!

This product is not available in your current location.

All Features and Benefits

Static pull tested in all directions
Offered in Clear or Black anodize finish
Allows rapid install or removal of Laerdal CSU4 from Ferno-Track in HEMS or EMS platforms

Compliance

Static Pull Tested in accordance with:
FAR23.561 – Airworthiness Standards: Normal, Utility, Acrobatic, and Commuter category airplanes
FAR 25.561 – Airworthiness Standards: Transport Category Airplanes
FAR27.561 – Airworthiness Standards: Normal Category Rotorcraft
FAR29.561 – Airworthiness Standards: Transport Category Rotorcraft
FAA form 8110—3 is available with supporting data to cover installations in specific aircraft

Specs

Width: 9.8 in; 24.89 cm
Height: 10.3 in; 26.16 cm
Length: 6 in; 15.24 cm

US Standard
Metric

This item was added to your cart

This item was added to your quote

Something went wrong. Please try again.