Laerdal CSU4

Part #FA887A140

The Laerdal CSU4 mount uses our Generic-X interface for Ferno-Track. Quarter-turn capture and release allows the CSU4 to be rapidly installed or removed from the mount as needed. Originally designed for use in fixed wing aircraft, this mount compensates for the curvature of the fuselage. Standard vertical variants are available. 

# FA887A140

To add this product to your ecommerce cart or to a quote please select a location.

Select Location

All Features and Benefits

  • Static pull tested in all directions
  • Offered in Clear or Black anodize finish
  • Allows rapid install or removal of Laerdal CSU4 from Ferno-Track in HEMS or EMS platforms

Compliance

  • Static Pull Tested in accordance with:
  • FAR23.561 – Airworthiness Standards: Normal, Utility, Acrobatic, and Commuter category airplanes
  • FAR 25.561 – Airworthiness Standards: Transport Category Airplanes
  • FAR27.561 – Airworthiness Standards: Normal Category Rotorcraft
  • FAR29.561 – Airworthiness Standards: Transport Category Rotorcraft
  • FAA form 8110—3 is available with supporting data to cover installations in specific aircraft

Specs

Width
9.8 in
Height
10.3 in
Length
6 in

This item was added to your cart

This item was added to your quote

Something went wrong. Please try again.